The “Single Anode” Concept from De Nora Elettrodi
Network — One anode, One cable — It’s that simple.

The LIDA® One anodes are the newest in the family of mixed metal oxide anode products specifically tailored to the cathodic protection of buried structures. Designed for installations where a single anode on a string is preferred for groundbeds with
widely varying soil resistivities, the mixed metal oxide coating is specially formulated for use in carbonaceous backfill.

LIDA® One is a 1" diameter titanium tube with a precious metal oxide coating. This
mixed metal oxide is a crystalline, electrically-conductive coating that activates the titanium and enables it to function as an anode. When applied on titanium, the coating has an extremely low consumption rate, measured in terms of milligrams per year. As a result of this low consumption rate, the tubular dimensions remain nearly constant during the design life of the anode — providing a consistently low resistance anode.

By increasing the length of our tubular anode, yet reducing total current output, De Nora Elettrodi Network has created another reliable mixed metal oxide anode product line with even greater cost savings over competitive anode technologies. As with all of De Nora Elettrodi mixed metal oxide tubular anodes, the combination of a tough and lightweight product, its ease of handling and installation, the superior mechanical connection,
and our five year, no hassle warranty, makes LIDA® One the ONE anode for unparalleled CP performance.

FEATURES

• Designed to be used as a
  single anode
• Durable — no breakage or
  damage while getting it to
  the job site
• Special crimped moisture seal
  to prevent damage to
  electrical connection
• No lead — no epoxy
  potting compounds
• Five Year Product Warranty

LIDA One Anode Life in Sea Water

LIDA One Anode Life in Fresh Water

LIDA One Anode Life in Brackish Water

LIDA One Anode Life in Mud

.

LIDA One Anode Life in Coke

LIDA One Anode Life in Sand

Maximum Current for LIDA® One Anodes (life in years) LIDA One 1 x 45" LIDA One 1 x 60" LIDA One 1 x 90"

In chloride rich soils or muds, a suitable chlorine resistant cable must be used with the anodes.

Please contact us when operation is expected in waters below 5° C.

 

LIDA® One	LIDA® Crimp

 

Click here for a print friendly PDF version.

LIDA® is a U.S. registered trademark of ELTECH Systems Corporation. LIDA® is a registered
trademark worldwide of Oronzio de Nora SA licensed exclusively to the De Nora Elettrodi Network.

LIDA TSA™ a trademark of ELTECH Systems Corporation and De Nora Elettrodi Network.
All information, recommendations and suggestions appearing herein concerning the
use of our products are based upon tests and data believed to be reliable. However, it is
the user’s responsibility to determine the suitability for his own use of the products
described herein. Since the actual use by others is beyond our control, no guarantee,
expressed or implied, is made by De Nora Elettrodi Network Companies as to the effects
of such use or the results to be obtained, nor does De Nora Elettrodi Network Companies
assume any liability arising out of the use by others of the products referred to herein. In
addition, the information herein is not to be construed as absolutely complete since additional information may be necessary or desirable when particular circumstances exist or because
of applicable laws or government regulations. Nothing herein contained is to be construed
as a recommendation to infringe any patent.